Reducer type rubber expansion joint
1. Minimal axial dimensions 2. Limited weight 3. Low warping forces 4. High-resistance to work 5. High-capacity acoustic damping
Classification:
Valve Accessories
keywords:
GATE VALVE | Valve
Description
1. Minimal axial dimensions
2. Limited weight
3. Low warping forces
4. High-resistance to work
5. High-capacity acoustic damping
6. Working Pressure(Bar):
DN50-DN300: 10
DN350-DN600: 6
7. Burst pressure(Bar):
DN50-DN300: 20
DN350-DN600: 15
8. Vacuum(mmHg):
DN50-DN300: 650
DN350-DN600: 400
Remark:
1. All rubber expansion joints are finshed with retaining flanges, limit rod units are available on special request.
2. Pressures shows are recommended“operating”, test pressure is 1.5time“operating”, burst pressure is 3 time “operating”
.
3. Vacuum rating is based on neutral installed length without external load. Products shall not be installed “elongated”on vacuum applications.
4. Do not weld near the expansion joints or weld the steel flanges to the piping after the expansion joints are installed. This will either burn or seriously damage the expansion joints.
previous
next
previous
next
Related Products
Inquiry
If you are interested in our products, please leave your e-mail, we will contact you as soon as possible, thank you!