2022-03-28
Structure characteristics of butterfly valve
The structure of the butterfly valve and other valves slightly will be some difference, especially the sealing of a size A surface bias in the butterfly plate and the valve stem axis, and in the channel of the valve body axis is offset to a size B is open, the sealing surface of the disc will be faster than the single eccentric from the valve seat sealing surface, in the long the radius of the large rotating semicircle, tangent disc sealing surface rotation trajectory will form a theta angle and valve seat sealing surface, the instant when the disc sealing surface to be completely separated from the valve seat sealing surface, so that the valve in the opening and closing process, the sealing surface between the butterfly plate and the valve seat relative to mechanical wear, extrusion angle of short distance of travel and when the butterfly plate rotation from 0 degrees to 8 degrees to 12 degrees, so the mechanical wear and deformation is reduced, the butterfly valve sealing performance and service life more progress.
Characteristics and description of butterfly valve
1. The valve can be designed to be flanged and clamped.
2. The driving mode can choose manual, electric or pneumatic
3, the use of "U" stainless steel seal ring, the valve seat has a certain elasticity, regardless of high temperature and low temperature, it has excellent sealing performance with butterfly plate.
4. It is metal to metal wire sealing butterfly valve. The seal face of butterfly plate is overlay stainless steel or hardfacing hard alloy. The seal face is wear-resistant and has long service life.
5, butterfly plate streamline design, through rod, wear-resistant shaft sleeve and other parameters make the butterfly valve with excellent sealing, temperature resistance, pressure resistance, wear resistance, corrosion resistance.