2025-01-22
Independent pressure regulator valve is a valve product that can be automatically section, very many platforms have placed this valve, but for the application of independent pressure regulator valve, probably very many friends are not very familiar with, the following by the Shanghai Jin Gang Automatic Control Valve Co.
Independent pressure control valve application method is divided into the application of gas at room temperature or low viscosity liquid places and steam places two kinds:
First, at room temperature application of gas or low viscosity liquid places when the manipulation:
1, sluggishly open the valve before and after the shut-off valve.
2, loosen the exhaust plug, until the gas or liquid from the implementation of the body overflow.
3, and then from the new tighten the exhaust plug, regulating valve can work. The size of the required pressure value can be obtained through the mediation of the pressure adjustment disk, mediation, pay attention to the investigation of the pressure labeling value, action is slow, shall not make the valve stem with the rotation.
Second, the application of steam place when the manipulation:
1、Screw down the liquid injection port screw from the condenser.
2、Loosen the exhaust plug of the implementation organization.
3、Apply the leakage head to enter through the liquid injection port until the exhaust hole flows out.
4、Tighten the exhaust plug and continue to fill water until it overflows the liquid injection port.
5, tighten the liquid injection port screws.
6, slow to open the regulating valve before and after the shut-off valve.
7, mediate the pressure adjustment disk, and investigate the pressure revealed value to reach the requirements.